First, start by gathering the necessary materials for the project. You'll need a piece of 1/8th inch steel plate, a grinder, a saw to cut the plate, and a drill with various sizes of drill bits. The first step is to cut a strip of steel that is long enough to wrap around the pulley. Once done, grind the edges of the steel strip to round them off, which will give your hands a better grip and prevent any damage to the belt.
Next, drill two holes at the end of the strip, about one inch apart, with a drill bit size slightly smaller than the bolts that hold the pulley in place. After drilling the holes, use a handsaw to cut the strip between the holes, creating a V-shaped slot that precisely fits over the bolts.
To complete your new fan pulley wrench, cut a piece of scrap steel rod or tube that is about 4 inches long. Drill a hole in the center of the rod that fits the size of the bolt holding the pulley in place. This rod will be used as the handle of the wrench.
After completing the steps, align the two holes in the steel strip with the bolts holding the pulley. Then pinch the strip tightly around the bolts by holding it with your hands. Finally, insert the steel rod or tube into the end of the wrench, presenting the holes in the steel strip. Twist the rod or tube to loosen the bolts and safely remove the fan pulley.
In conclusion, making your homemade fan pulley wrench is an excellent way to save money and increase your DIY mechanic skill set. Using affordable materials, you can make this essential tool in less than an hour, so why not try making one for yourself? It's a simple process that requires basic DIY skills, and once you have it, you'll wonder how you ever managed without it. Keyword- Fan Pulley Wrench